TeimLam® System
WATERPROOFING
TeimLam®
A system for high waterproofing requirements, walkable, easy to repair and with maximum reliability, also approved with European Technical Evaluation ETE (former European Technical Approval Document).
Terraza
1 of 4Cubiertas con o sin aislamiento
2 of 4Jardineras
3 of 4Cubiertas aparcamiento
4 of 4Building and new constructions
Waterproofing systems for roofs, with or without insulation, parking decks, visible or hidden terraces, roads, driveways, pedestrian areas, squares, fountains, planters, gutters and other singular constructive elements.
Repairs
Systems for the waterproofing of roofs over traditional waterproofing systems hidden with different types of flooring (tile, terrazzo, mortar, etc.) and over existing roofs of fiber cement, metal, zinc, asphalt, synthetic coatings, etc.
Special waterproofing services
Special treatments for the waterproofing of swimming pools, tunnels, dams, canals, tanks, silos, bridges, docks, etc.
The new TeimLam® system consists of a continuous coating formed “in situ” based on a synergistic combination of state-of-the-art polymeric binders and reinforcements with selected fibres. It is equipped with a self-protection layer in accordance with the expected applications (chemical attack, U/V radiation, specific aggressive agents in the environment, light, medium or heavy traffic, etc.), smooth or non-slip finishes and can be presented in any colour. It can also be applied with different thicknesses, from one to five millimetres, depending on the requirements of use, even on adhered thermal insulation.
Self-protection
Epoxy/fv composite
2 of 4
Elastomer
3 of 4
Consolidation and adhesion
4 of 4TEIMLAM®
Characteristics
| Differential qualities | |
|---|---|
| Adhesion | It fully adheres to the substrate, adapting to the geometry of the substrate, without cuts or welds. |
| Supports | It is compatible with all types of supports, using specific adhesives for concrete, steel, ceramics, asphalt, hydraulic conglomerates and others, as well as regenerating surfaces with low surface cohesion. |
| Hidden / Visible | Visible, it integrates a protection adhered to it, suitable for different types of use: light, medium and/or heavy loads. In hidden applications under screed, the screed is laid directly on the system, using cement glue or mortar. In landscaped areas, the system incorporates anti-root and puncture protection. |
| Crack bridging | It has the capacity to absorb fissures and new cracks up to 2 mm. |
| Singular points | The system itself integrates specific designs for joints, seams and singular points with movement, as well as drains, gutters, skylights, free edges, etc. |
| Thermal shock resistance | Thermal stability from +120ºC. to -20ºC. |
| Weathering performance | Exceptional, no appreciable loss of gloss and no chalking |
| Toughness and chemical resistance | Facilitates application in special areas requiring specific protection: bird activity, salt spray, acid rain, etc. |
| Thermal Insulation | Excellent compatibility with the usual thermal insulation elements, integrating insulation and waterproofing. |
| Traffic | It is compatible with TeimPav® Paving Systems, allowing it to adapt to any kind of traffic, whether light, medium or heavy. |
| Fireproof | Possibility of formulated fireproof for applications that require it. |
| Passable under implementation | It can be used during all construction processes on a construction site, without the need for protection. |
| Versatility of materials | The versatility of the materials offers numerous possibilities for aesthetic finishes and colours depending on the construction design. |
| Long service life | It has a high resistance to aging, which gives it a longer life than most organic coatings. |
| Properties | |
|---|---|
| Adherence to the support | >2 MPa |
| Elongation at break by tensile elastomer | 200% |
| Elongation at break by traction of flexible epoxy | 60% |
| Tensile strength of the laminate | 5% |
| Tensile fracture of the laminate | 26-30 MPa |
| Static strength and punching | L 4 |
| Strength and dynamic punching | L 4 |
| Water absorption | <2% |
| Foldability | -10ºC |
| Maximum working temperature | + 90ºC |
| Radiation resistance U/V | Excelent |
| Hazardous substances | Does not contain |
| Service life | >20 years |
The current TeimLam® System is the result of the evolution and improvement of the original TeimLam® with Spanish ETA 1983. Updated according to the new EU requirements, it has the European Technical Assessment ETE (former ETA European Technical Approval Document) with nº 04/0097, being, moreover, the only approved system for walkable waterproofing.
TEIMLAM®
Designs
The Waterproofing Systems are designed according to the construction characteristics of each case, differentiating 2 main groups
Within each group, several subgroups can be distinguished:
- Hidden without thermal insulation
- Hidden with thermal insulation
- Hidden landscaped
- Visitable without thermal insulation
- Visitable with thermal insulation
- Passable with different finishes
From a technical point of view, we differentiate between two designs
- Hidden waterproofing, where the elastomer elongation is higher than 150% with a tensile strength of less than 5 MP
- Visible waterproofing, with an elastomer elongation of less than 150% and a tensile strength of more than 5 MPa
In the passable mode, we adjust the elastic modulus according to the required intensity of use (pedestrian or vehicle or machine traffic).
TEIMPER GROUP
Let's do great things together
Whatever sector you work in, we can certainly advise you on the best system for you to implement.
Contact our team, together we will make your project a reality.
